Наукові статті
Постійне посилання на фондhttps://repositary.knuba.edu.ua/handle/987654321/30
Переглянути
7 результатів
Результат пошуку
Документ Research of conditions of removal of fire protection from building construction(2020) Tsapko, Yu.; Tsapko, A.; Bondarenkо, O.Fireproof coatings at the time of operation of the building structure is a separate and complex task, covering both the stages of the process protection from moisture, and subsequent fire protection formed during the swelling of the coating. They have been proven to create a layer of material on the surface that prevents moisture from penetrating the wood when the destruction of the coating begins. This makes it possible to determine the effect of flame retardants and the properties of the protective compositions on the process of slowing down the rate of water absorption. The process of moisture transfer by flame retardant coating in the presence of a polymeric shell is simulated, the diffusion and mass transfer dependences are obtained, and the diffusion coefficient is determined, which is 7.08·10-12 m2/s, which allow to obtain a change in the dynamics of moisture upon washing out of the flame retardant. The results of determining the weight loss of the coating sample during exposure to water indicate the ambiguous effect of the nature of the leaching agent. In particular, this implies the availability of data sufficient for qualitatively conducting the process of inhibition of moisture diffusion and detection on its basis of the moment from which the fall of the coating efficiency begins. Features of slowing down the process of moving the moisture to the material that is treated with flame retardant, are in several aspects. Namely, the use of water-insoluble flame retardants and other components, as well as polymer binder, which are characterized by the formation of polymer shell on the surface of the wood.Документ Increase of fire resistance of coating wood with adding mineral fillers(Transbud-2018, 2018) Tsapko, Y.; Kyrycyok, V.; Tsapko, A.; Bondarenko, O.; Guzii, S.The article covers all the stages of the process of fire protection: as the separation of gases, heat transfer, the swelling of the coating, which is formed during by the action of fire. To determine the fire protection efficiency in the coatings developed, studies have been carried out on determining the combustibility of wood in terms of mass loss and increase in the temperature of flue gases, and it has been established that mass loss of coated wood does not exceed 3% and the temperature does not exceed 160°C. The results of the determination of the protection efficiency for the system have shown that under the influence of the hightemperature flame of burning of the material and the loss of the mass of the coating is reduced due to the formation of high-temperature compounds, while the time to reach the limiting temperature increases. Studies on determining the quality of fire protection wood treatment by coating showed that the rate of cooking for a rough sample of wood was more than 2 mm/min, for fire-proof samples - did not exceed 0.5 mm/min, which makes it possible to conclude that it is advisable to use them.Документ Determination of the laws of thermal resistance of wood in application of fire-retardant fabric coatings(2020) Tsapko, Yu.; Tsapko, A.; Bondarenko, O.Given that the main material for making structures is wood, which belongs to the group of medium flammability materials, there is a need for flameproofing with modern effective means. Its essence lies in providing wood with the ability to resist flame and flame propagation on the surface. preventing free access of oxygen, which accelerates the combustion process, can eliminate the risk of fireДокумент Modeling of thermal conductivity of reed products(2020) Tsapko, Yu.; Tsapko, A.; Bondarenkо, O.The present work researches processes of heat transfer by samples of mats manufactured from reed. Due to the unique properties of the reed, such as medium density, low thermal conductivity, relatively high weather resistance, high chemical resistance, possibility to produce parts on-site, cost-effectiveness and others, reed products are widely used in building construction despite the high rate of development of new technologies. The mechanisms of heat insulation in the result of energy transfer through the material are established, which makes it possible to influence this process. It is proven, that the mechanisms are conditioned upon the increased porosity of the material. Thus, decreasing volume weight results in decreasing thermal conductivity, and vice versa. The simulation of the heat transfer process with the flameproof coating is carried out, the dependencies of the thermophysical coefficients on the temperature are determined. Based on the obtained dependencies, the coefficient of thermal conductivity for the products made of dry pine wood is calculated and makes 0.056 W / (m · K). Features of slowing down the process of heat transfer to material made of wood wool and glue binding agent with the formation of pores were studied. This is explained by the fact that there is no movement of air in large pores, accompanied by heat transfer. Thus, there are grounds to argue for the possibility of directed regulation of the processes of the formation of thermal insulation products using the reeds characterized by voids in the stems.Документ Establishment of heat-exchange process regularities at inflammation of reed samples(2019) Tsapko, Yu.; Bondarenko, O.; Tsapko, A.At present, reed is growing in popularity as an environmentally safe roofing material. However, it is classified as a flammable material. To reduce this shortcoming, flame-retarding treatment is used, which makes this material resistant to inflammation.Документ Effect of a flame-retardant coating on the burning parameters of wood samples(2019) Tsapko, Yu.; Bondarenko, O.; Tsapko, A.Wood is widely used as a building material in construction and architecture due to its mechanical and operational properties. However, because of its high combustibility, it is a fire-hazardous material. Level of fire safety of objects in which wood building structures are used can be raised by means of fire protection treatment, namely, providing the wood with the ability to withstand flame and its surface propagation, preventing free access of oxygen which promotes wood destruction and accelerates the burning process.Документ Modeling the process of moisture diffusion by a flameretardant coating for wood(Eastern-European Journal of Enterprise Technologies, 2020) Tsapko, Yu.; Tsapko, A.; Bondarenko, O.At present, among the most common building materials is wood, which, in terms of its flammability group, belongs to the group of combustible materials of medium flammability. To reduce these deficiencies, fire-retardant treatment provides wood with the capability to withstand the effects of flame and its propagation. One of the ways to protect wood from fire is to apply a fireproof coating on its surface, which for some time prevents heat from accessing the wood.