Наукові статті
Постійне посилання на фондhttps://repositary.knuba.edu.ua/handle/987654321/30
Переглянути
2 результатів
Результат пошуку
Документ Modeling of thermal conductivity of reed products(2020) Tsapko, Yu.; Tsapko, A.; Bondarenkо, O.The present work researches processes of heat transfer by samples of mats manufactured from reed. Due to the unique properties of the reed, such as medium density, low thermal conductivity, relatively high weather resistance, high chemical resistance, possibility to produce parts on-site, cost-effectiveness and others, reed products are widely used in building construction despite the high rate of development of new technologies. The mechanisms of heat insulation in the result of energy transfer through the material are established, which makes it possible to influence this process. It is proven, that the mechanisms are conditioned upon the increased porosity of the material. Thus, decreasing volume weight results in decreasing thermal conductivity, and vice versa. The simulation of the heat transfer process with the flameproof coating is carried out, the dependencies of the thermophysical coefficients on the temperature are determined. Based on the obtained dependencies, the coefficient of thermal conductivity for the products made of dry pine wood is calculated and makes 0.056 W / (m · K). Features of slowing down the process of heat transfer to material made of wood wool and glue binding agent with the formation of pores were studied. This is explained by the fact that there is no movement of air in large pores, accompanied by heat transfer. Thus, there are grounds to argue for the possibility of directed regulation of the processes of the formation of thermal insulation products using the reeds characterized by voids in the stems.Документ Establishment of heat-exchange process regularities at inflammation of reed samples(2019) Tsapko, Yu.; Bondarenko, O.; Tsapko, A.At present, reed is growing in popularity as an environmentally safe roofing material. However, it is classified as a flammable material. To reduce this shortcoming, flame-retarding treatment is used, which makes this material resistant to inflammation.