Вибрані статті з наукових збірників
Постійне посилання на фондhttps://repositary.knuba.edu.ua/handle/987654321/27
Переглянути
15 результатів
Результат пошуку
Документ Thermoelasticity of elastomeric constructions with initial stresses(КНУБА, 2020) Bazhenov, V. A.; Kozub, Yu. G.; Solodei, I. I.The article presents an algorithm for solving linked problems of thermoelasticity of elastomeric structural elements on the basis of a moment scheme of finite elements. To model the processes of thermoelastic deformation of structures with initial stresses the incremental theory of a deformed solid is used. At each step of deformation, the stiffness matrix is adjusted using an incremental geometric stiffness matrix. The use of triple approximation of displacements, deformations and volume change function allows to consider the weak compressibility of elastomers. The components of the stress tensor are calculated according to the Duhamel-Neumann law. To solve the problem of thermal conductivity, a thermal conductivity matrix considering the boundary conditions on the surface of a finite element is constructed. A sequential approximation algorithm is used to solve the thermoelasticity problem. At each stage of the solution, the characteristics of the thermal stress state are calculated. Based on the obtained components of stress and strain tensors, the intensity of internal heat sources is calculated as the dissipative energy averaged over the load cycle. To calculate the dissipative characteristics of the viscoelastic elastomer the parameters of the Rabotnov’s relaxation nucleus are used. Solving the problem of thermal conductivity considering the function of internal heat sources allows you to specify the heating temperature of the body. At each cycle of the algorithm, the values of the physical and mechanical characteristics of the thermosensitive material are refined. This approach to solving thermoelastic problems is implemented in the computing complex "MIRELA+". Based on the considered approach, the solutions of a number of problems are obtained. The results obtained satisfactorily coincide with the solutions of other authors. Considering the effect of preload and the dependence of physical and mechanical properties of the material on temperature leads to significant adjustments to the calculated values.Документ Creation of mathematical model of platformvibrator with shock, designed for concrete products compaction and molding(КНУБА, 2020) Bazhenov, V. A.; Pogorelova, O. S.; Postnikova, T. G.Platform-vibrators are the main molding equipment in the production of precast concrete elements. Shock-vibration technology for the precast concrete production on low-frequency resonant platform-vibrators significantly improves the quality of the products front surfaces and the degree of their factory readiness. This technology is used to produce large elements. We describe the creation of a mathematical model for platform-vibrator that uses shock to produce asymmetric oscillations. The values of the upper and lower accelerations of the mold with concrete have different values with shock-vibration technology. The created mathematical model corresponds to the two-body 2-DOF vibro-impact system. It is strongly nonlinear non-smooth discontinuous system. It has some peculiar properties, namely: the upper body with very large mass breaks away from the lower body during vibrational motion; both bodies move separately; the upper body falls down onto the soft constraint; the impact that occurs is soft one due to the softness and flexibility of the constraint. The soft impact simulation requires special discussion. In this paper, we simulate a soft impact by a nonlinear contact force in accordance with the Hertz quasistatic contact law. The numerical parameters for this system were chosen in such a way that: firstly they provide the fulfillment of requirements for real machine, and secondly they allow analyzing its dynamic behavior by nonlinear dynamics tools. The created model is well enough to fulfill a number of requirements, namely: T-periodic steady-state movement after passing the transient process; the appropriate value of mold oscillations amplitude; the satisfactory value of the asymmetry coefficient that is the ratio of lower acceleration to the upper acceleration. We believe that the created model meets all the necessary requirements.Документ Buckling and vibrations of the shell with the hole under the action of thermomechanical loads(КНУБА, 2020) Bazhenov, V. A.; Krivenko, O. P.The paper outlines the fundamentals of the method of solving static problems of geometrically nonlinear deformation, buckling, and vibrations of thin thermoelastic inhomogeneous shells with complex-shaped midsurface, geometrical features throughout the thickness, under complex thermomechanical loading. The technique is based on the geometrically nonlinear equations of three-dimensional thermoelasticity, the finite element formulation of the problem in increments, and the use of the moment finite-element scheme. A thin shell is considered by this method as a threedimensional body. We approximate a shell by one spatial universal finite element (FE) throughout the thickness. The universal FE is based on an isoparametric spatial FE with polylinear shape functions for coordinates and displacements. The universal element has additional variable parameters introduced to expand its capabilities. The method of modal analysis of the shell is based on an approach that at each current stage of thermomechanical loading takes into account the stresses accumulated at the previous stages. The developed algorithm allows one to study geometric nonlinear deformation and buckling of elastic shells of an inhomogeneous structure with a thin and medium thickness, as well as to study small vibrations of the shells relative to the reference deformed state caused by static loading, taking into account large displacements and a prestressed state. An analysis of the stability and vibration of the spherical panel with the hole is carried out. The effect on the frequencies and mode shapes of the shell of the sequential action of thermal and mechanical loads is investigated.Документ Kyiv school of the theory of structures(КНУБА, 2020) Bazhenov, V. A.; Perelmuter A.V.; Vorona, Yu. V.The paper presents a review of more than a century-long history of Kyiv school of the theory of structure, the foundation of which was laid by world-famous scientists V.L. Kirpichov and S.P. Tymoshenko. The birth of the Kyiv scientific school of the Theory of structures is associated in this paper with the establishment at the Kyiv Polytechnic Institute the Strength of Materials Department. It is noted that further formation and development of the theory of structures was facilitated by the creation in 1918 of the Ukrainian Academy of Sciences, the Institute of Mechanics of the NAS of Ukraine, expansion of relevant research in higher education institutions, creation of new academic and sectoral research institutions, most of which is located in Kyiv. The contribution of Kiev scientists to the development of methods for analyzing spatial structures of bar and shell type, their inelastic behavior, as well as dynamics and stability is reflected. Particular attention is paid to the fundamentally new opportunities for the development of the theory of structures in the era of numerical analysis. The successes of Kiev mechanics in the field of development and improvement of structure analysis numerical methods, such as the finite difference method and various modifications of finite element methods, are emphasized. Kiev engineers and scientists are also known for their developments in the field of design and calculation of modern cable-stayed structures, as well as optimal design. The activities of the scientific school of structural mechanics of the Kyiv National University of Construction and Architecture are also covered in the review. In the final part of the paper the new issues connected with the justification of calculation models and the analysis of reliability of constructions are considered. Some of this problems are dictated by the demands of practice, in particular those that arosed in the process of Chernobyl New Safe Confinement designing. The publication contains a wide bibliography.Документ Transitional regimes under route to chaos in vibroimpact system(КНУБА, 2019) Bazhenov, V. A.; Pogorelova, O. S.; Postnikova, T. G.In recent years in nonlinear dynamics particular attention was paid to studying the chaotic behaviour of dynamical systems and their routes to chaos. Sometimes this route may be intricate. We watched such intricate route to chaos when studying the quasi-periodic route to chaos in strongly nonlinear non-smooth discontinuous vibroimpact system that was two-body 2-DOF one. After Neimark-Sacker bifurcation many different regimes replace each other. There are transitional regimes with inconsistent characteristics among them. We analyze these regimes with continuous wavelet transform CWT applying. CWT plots confirm just their transition kind and give clear picture of different frequencies presence in time series and their distribution in time.Документ Wavelet transform using for analysis of vibroimpact system chaotic behavior(КНУБА, 2018) Bazhenov, V. A.; Pogorelova, O. S.; Postnikova, T. G.; Lukianchenko, O. O.Chaotic behaviour of dynamical systems, their routes to chaos, and the intermittency are interesting and investigated subjects in nonlinear dynamics. The studying of these phenomena in nonsmooth dynamical systems is of the special scientists’ interest. In this paper we apply relatively young mathematical tool – continuous wavelet transform CWT – for investigating the chaotic behavior and intermittency in particular in strongly nonlinear non-smooth discontinuous 2-DOF vibroimpact system. We show that CWT applying allows to detect and determine the chaotic motion and the intermittency with great confidence and reliability, gives the possibility to demonstrate route to chaos via intermittency, to distinguish and analyze the laminar and turbulent phases.Документ Invariant torus break-down in vibroimpact system – route to crisis ?(КНУБА, 2018) Bazhenov, V. A.; Pogorelova, O. S.; Postnikova, T. G.Chaotic vibrations of dynamical systems and their routes to chaos are interesting and investigated subjects in nonlinear dynamics. Particularly the routes to chaos in non-smooth dynamical systems are of the special scientists’ interest. In this paper we study quasiperiodic route to chaos in nonlinear non-smooth discontinuous 2-DOF vibroimpact system. The break-down of invariant torus or of the closed curve occurs just under the quasiperiodic route to chaos. Is it route to crisis? In narrow frequency range different oscillatory regimes have succeeded each other many times under very small control parameter varying. There were periodic subharmonic regimes − chatters, quasiperiodic, and chaotic regimes, the zones of prechaotic and postchaotic motion. The hysteresis effects (jump phenomena) occurred for increasing and decreasing frequencies. The observed chaos was the transient one.The chaoticity of obtained regime has been confirmed by typical views of Poincaré map and Fourier spectrum, by the positive value of the largest Lyapunov exponent, and by the fractal structure of Poincaré map. These investigations confirm the theory by Newhouse, Ruelle, and Takens who suggested a new bifurcation scenario where a periodic solution produces subsequently a torus and then a strange attractor.Документ A methodology of determining of parameter j* in discrete models of finite element method(КНУБА, 2017) Bazhenov, V. A.; Pyskunov, S. О.; Shkryl, О. О.Based on the method of reactions, a technique for determining of the parameter J * by the method of subdomain moving in discrete models of finite element method (FEM) has been developed. A number of test problems solved. The obtained results confirm the effectiveness of the technique.Документ Dynamic behaviour of nonlinear nonsmooth discontinuous vibroimpact system(КНУБА, 2015) Bazhenov, V. A.; Pogorelova, O. S.; Postnikova, T. G.Authors shortly describe the problem state about studying of discontinuous vibroimpact systems dynamical behaviour. Recently the investigations of such systems are developed rapidly. There is survey of world scientific literature about this problem. Information and description of an International Conference on Nonlinear Dynamics Complexity is given. Authors show owns the most spectacular results demonstrating the phenomena unique for nonsmooth systems describing by differential equations with discontinuous right-hand side. These results were obtained by numerical parameter continuation method.Документ Lyapunov exponents estimation for strongly nonlinear nonsmooth discontinuous vibroimpact system(КНУБА, 2017) Bazhenov, V. A.; Pogorelova, O. S.; Postnikova, T. G.Lyapunov exponents are ones of the most important characteristics for the definition of the dynamical system state. Their estimation for nonsmooth discontinuous system that is vibroimpact system has got certain difficulties. We study their calculation by following the evolution of two nearby orbits in phase space and use three formulas for such estimation. We check this calculation for three different oscillatory regimes: periodic, quasi-periodic and chaotic. We also define the largest Lyapunov exponent by Benettin’s algorithm and compare obtained results.