Вип. 104
Постійний URI для цього зібранняhttps://repositary.knuba.edu.ua/handle/123456789/12342
Переглянути
Документ Buckling and vibrations of the shell with the hole under the action of thermomechanical loads(КНУБА, 2020) Bazhenov, V. A.; Krivenko, O. P.The paper outlines the fundamentals of the method of solving static problems of geometrically nonlinear deformation, buckling, and vibrations of thin thermoelastic inhomogeneous shells with complex-shaped midsurface, geometrical features throughout the thickness, under complex thermomechanical loading. The technique is based on the geometrically nonlinear equations of three-dimensional thermoelasticity, the finite element formulation of the problem in increments, and the use of the moment finite-element scheme. A thin shell is considered by this method as a threedimensional body. We approximate a shell by one spatial universal finite element (FE) throughout the thickness. The universal FE is based on an isoparametric spatial FE with polylinear shape functions for coordinates and displacements. The universal element has additional variable parameters introduced to expand its capabilities. The method of modal analysis of the shell is based on an approach that at each current stage of thermomechanical loading takes into account the stresses accumulated at the previous stages. The developed algorithm allows one to study geometric nonlinear deformation and buckling of elastic shells of an inhomogeneous structure with a thin and medium thickness, as well as to study small vibrations of the shells relative to the reference deformed state caused by static loading, taking into account large displacements and a prestressed state. An analysis of the stability and vibration of the spherical panel with the hole is carried out. The effect on the frequencies and mode shapes of the shell of the sequential action of thermal and mechanical loads is investigated.Документ Creation of mathematical model of platformvibrator with shock, designed for concrete products compaction and molding(КНУБА, 2020) Bazhenov, V. A.; Pogorelova, O. S.; Postnikova, T. G.Platform-vibrators are the main molding equipment in the production of precast concrete elements. Shock-vibration technology for the precast concrete production on low-frequency resonant platform-vibrators significantly improves the quality of the products front surfaces and the degree of their factory readiness. This technology is used to produce large elements. We describe the creation of a mathematical model for platform-vibrator that uses shock to produce asymmetric oscillations. The values of the upper and lower accelerations of the mold with concrete have different values with shock-vibration technology. The created mathematical model corresponds to the two-body 2-DOF vibro-impact system. It is strongly nonlinear non-smooth discontinuous system. It has some peculiar properties, namely: the upper body with very large mass breaks away from the lower body during vibrational motion; both bodies move separately; the upper body falls down onto the soft constraint; the impact that occurs is soft one due to the softness and flexibility of the constraint. The soft impact simulation requires special discussion. In this paper, we simulate a soft impact by a nonlinear contact force in accordance with the Hertz quasistatic contact law. The numerical parameters for this system were chosen in such a way that: firstly they provide the fulfillment of requirements for real machine, and secondly they allow analyzing its dynamic behavior by nonlinear dynamics tools. The created model is well enough to fulfill a number of requirements, namely: T-periodic steady-state movement after passing the transient process; the appropriate value of mold oscillations amplitude; the satisfactory value of the asymmetry coefficient that is the ratio of lower acceleration to the upper acceleration. We believe that the created model meets all the necessary requirements.