Матеріалознавство
Постійний URI для цього зібранняhttps://repositary.knuba.edu.ua/handle/987654321/1859
Переглянути
Документ Fillers for modification of polyester powder coating(IOP Publishing Ltd, 2020-09) Gots, V. I.; Lastivka, O. V.; Tomin, O. O.; Tymoshenko, S. A.In the article effectiveness of the use of fillers to improve the physical and mechanical properties of the coating varied depending on the average size of the filler particles and crystalline shape was studied. According to the indicators of impact strength to back impact and bending strength of the coating, the most effective is the use of microsilica with an average size of 2.9 μm. As the average filler size increases, the gloss and impact strength of the coating reduce. To increase the bending strength of the coating, it is advisable to use fillers in the form of wollastonite, which is characterized by a fibrous crystal shape, which improves the physical and mechanical properties of the coating and prevents cracking, acting as a reinforcing agent. In addition, the analysis of the obtained study results shows that the use of the studied Ukrainianmade fillers in the powder paint composition promotes obtaining a covering with adjustable physical and mechanical characteristics.Документ Influence of whitening additives on the properties of decorative slag-alkaline cements(IOP Publishing Ltd, 2020-09) Gots, V. I.; Gelevera, O. G.; Petropavlovsky, O. N.; Rogozina, N. V.; Smeshko, V. V.Traditional decorative cements are made on the basis of white cements and the demand for them is constantly growing. But such cements have all the disadvantages of clinker cements, namely, high energy intensity and high price. An alternative may be slag-alkali cements having higher physical and mechanical characteristics and lower price. Therefore, these studies were aimed at choosing such additives that would have the maximum whitening properties and would enhance the stabilization of bleaching processes during hydration and hardening of slag in the presence of alkalis, to determine the simultaneous effect of three additives on the whiteness and physical-mechanical characteristics, as well as to determine the optimal the content of these additives in slag-alkali decorative compositions. In this work, as a result of the studies performed, the possibility of obtaining effective slag-alkali white cements as the basis for the production of decorative concrete with acceptable economic characteristics is proved. The influence of each of the bleaches on such characteristics of decorative slagalkali cements as strength, setting time, whiteness is established. Methods for optimizing compositions are identified.Документ Modification of the structure of the stabilized basalt fiber(IOP Publishing Ltd, 2020-09) Gots, V. I.; Palchyk, P. P.; Tymoshenko, S. A.; Palchyk, S. P.The study of thermophysical, physical-mechanical and acoustic characteristics of coarse continuous basalt fiber in the conditions of influence of operational factors and corrosion environment is carried out. It is shown that obtaining barrier materials with high thermophysical and acoustic properties is possible by creating a porous system in the material with a predetermined textural characteristic of pores of different class, purpose and combination. The influence of the porous system of coarse continuous basalt fiber on the operational properties of flexible heat and sound insulation products and materials has been studied. It is determined that the performance characteristics of flexible thermal insulation materials are in direct proportion to the degree of porosity of the constituent materials and their structural characteristics. Shown that the increase in the operating temperature of these materials, sound and thermal resistance is determined by the chemical and mineralogical composition of the source materials and their structural characteristics. The influence of the mechanism of selective leaching of coarse continuous basalt fibers on their textural characteristics and the zone of operating temperatures is studied.Документ Production of modified basalt fibre for heat-insulating products manufacturing(IOP Publishing, 2019-12) Gots, V. I.; Berdnyk, O. Y.; Rogozina, N. V.; Maystrenko, A. A.As a result of the research flexible heat-insulating materials were developed based on basalt fiber with increased effectiveness, which can be achieved due to directed fiber microstructure forming through fusion modification. It is known that chemical composition of initial fusion not identically influences on physical and chemical and mechanical properties of basaltic fibres. Structural descriptions of fusion and basaltic fibre got from him appear main factors the nearer, than high speed of cooling. This index mainly depends on such constituents: а) ambient temperatures; b) coefficient of heat conducting; c) heat conducting of fusion; d) areas of surface. By researches influence of temperature of basaltic fusion was shown on the structure of fibres. Structural characteristics of the basalt fiber (number of active zones, coefficient of its distribution on the basalt fiber surface, as well as a correlation of three groups of active zones) depend on rheological properties of basal fusion, speed of drawing through the die plate and cooling speed.