Матеріалознавство

Постійний URI для цього зібранняhttps://repositary.knuba.edu.ua/handle/987654321/1859

Переглянути

Результати пошуку

Зараз показуємо 1 - 3 з 3
  • Документ
    Research of the efficiency of the fire fighting roof composition for cane
    (2019) Tsapko, Y.; Bondarenko, O.; Tsapko, А.
    Results of experimental researches about affectivity of firebiopotection products made from cane. Due to the unique properties of the cane, such as small volume weight, low thermal conductivity, rather high atmospheric resistance, high chemical resistance, the possibility of manufacturing parts at the site, efficiency, etc., cane products, despite the high pace of new technologies, are widely used in construction. Using cane in construction has a significant number of advantages, but needs protection from fire, from it produce a variety of products, equip the buildings. The unresolved issue of fire protection of products from such materials reduces the possibility of their use in construction. The experimental research on the determination of the firesafety properties of the cane set the ignition of the raw sample, while for fire-proof - the process of ignition and propagation of the flame did not occur. Especially inhibition of the process of ignition and propagation of cane fire treated with a covering impregnation solution, which consist of fire retardants under the influence of temperature with the absorption of heat and the release of noncombustible gases (nitrogen, carbon dioxide), change in the direction of the expansion in the direction of formation of non-combustible gases and heavy-duty coke residue, reducing the combustion of the material and, accordingly, the index of flammability. This indicates the possibility of directed control of the processes of transfer of high temperature to organic material by using special covering compositions for cane products. Introduction
  • Документ
    Research of Mechanism of Fire Protection With Wood Lacquer
    (2020) Tsapko, Yuriy; Lomaha, Vasyl; Bondarenko, Olga; Sukhanevych, Maryna
    The effect of the composition on the weight loss of wood protected by a coating based on inorganic and organic substances in the process of thermal exposure, which is a feature of the study of the flame retardant effectiveness of the composition, is investigated. The solution of this problem is carried out by specially developed methods. The influence of fire protection under the influence of high-temperature heat flux on the change in the process of loss of mass of fire-protected wood is determined and the mechanism of kinetics of action of the composition is characterized, which is characterized by a decrease in the speed of flame propagation and mass loss. The results of thermogravimetric studies determined the weight loss of the coatings as a function of temperature, the results of which investigated the activation energy at the temperature decomposition of the coatings and found that for wood it was 36.56 kJ / mol, and in the case of fire protection it increased 2.3 times. which makes it possible to conclude that it is advisable to use lacquer varnish to improve the fire retardant efficiency of wood. Thus, for the specimen of fire-retardant lacquer wood, there is a gradual decrease in temperature, ie, the work of the coating is fixed, and, accordingly, the activation energy is increased during the decomposition of the wood. In order to establish the flame retardant efficiency in the application of high-temperature blowing lacquer, studies were conducted to determine the combustibility index of wood by mass loss, flame spread and temperature increase of flue gases and found that when processing wood goes to the group of combustible materials with a burning index.
  • Документ
    Establishment of heat-exchange process regularities at inflammation of reed samples
    (2019) Tsapko, Yu.; Bondarenko, O.; Tsapko, A.
    At present, reed is growing in popularity as an environmentally safe roofing material. However, it is classified as a flammable material. To reduce this shortcoming, flame-retarding treatment is used, which makes this material resistant to inflammation.