Перегляд Автор "Pogorelova, O. S."
Зараз показуємо 1 - 1 з 1
- Результатів на сторінці
- Налаштування сортування
Документ Creation of mathematical model of platformvibrator with shock, designed for concrete products compaction and molding(КНУБА, 2020) Bazhenov, V. A.; Pogorelova, O. S.; Postnikova, T. G.Platform-vibrators are the main molding equipment in the production of precast concrete elements. Shock-vibration technology for the precast concrete production on low-frequency resonant platform-vibrators significantly improves the quality of the products front surfaces and the degree of their factory readiness. This technology is used to produce large elements. We describe the creation of a mathematical model for platform-vibrator that uses shock to produce asymmetric oscillations. The values of the upper and lower accelerations of the mold with concrete have different values with shock-vibration technology. The created mathematical model corresponds to the two-body 2-DOF vibro-impact system. It is strongly nonlinear non-smooth discontinuous system. It has some peculiar properties, namely: the upper body with very large mass breaks away from the lower body during vibrational motion; both bodies move separately; the upper body falls down onto the soft constraint; the impact that occurs is soft one due to the softness and flexibility of the constraint. The soft impact simulation requires special discussion. In this paper, we simulate a soft impact by a nonlinear contact force in accordance with the Hertz quasistatic contact law. The numerical parameters for this system were chosen in such a way that: firstly they provide the fulfillment of requirements for real machine, and secondly they allow analyzing its dynamic behavior by nonlinear dynamics tools. The created model is well enough to fulfill a number of requirements, namely: T-periodic steady-state movement after passing the transient process; the appropriate value of mold oscillations amplitude; the satisfactory value of the asymmetry coefficient that is the ratio of lower acceleration to the upper acceleration. We believe that the created model meets all the necessary requirements.