Show simple item record

dc.contributor.author Bogdanov, Vladislav
dc.date.accessioned 2020-04-30T11:46:51Z
dc.date.available 2020-04-30T11:46:51Z
dc.date.issued 2018-01-02
dc.identifier.citation Bogdanov V. Impact a circular cylinder with a flat on an elastic layer / V. Bogdanov // Transfer of innovative technologies = Трансфер інформаційних технологій : international scientific journal / KNUCA ; editor-in-chief М. Sukach - Kyiv : Lira-K, 2018. - Vol. 1(2). – P. 68 - 74. - Bibliogr. : 23 titl. uk_UA
dc.identifier.issn 2617-0264
dc.identifier.uri http://repositary.knuba.edu.ua:8080/xmlui/handle/987654321/3160
dc.description.abstract In the work the comparison of the results of solving two plane problems is performed: the impact of a circular cylinder with a plane platform parallel to the cylinder axle (the flat) with an elastic layer and a second − plane strain state of nonstationary interaction of a circular cylinder with a flat with an elastic layer in a purely elastic and elastic-plastic mathematical formulation corresponding. The first contact occurs along the plane of the flat. A good coincidence of the results of the second problem at an elastic stage with the results of the first problem is shown. In the author's works a new approach was developed to solve plane and tree dimension problems of impact and non-stationary interaction in an elastoplastic formulation. The crack growing was simulated using an elastoplastic mathematical model. The numerical solution was obtained using the finite difference method scheme.The use of an elastic-plastic formulation makes it possible: 1) determine the stress-strain state at the points determined by the partitioning grid of the computational domain, not only on the surface; 2) to give a reliable description of the development of plastic deformations − the stage corresponding to plasticity is a continuation of the elastic stage; 3) reliably determine the destruction toughness. A method has been developed for calculating plastic strain fields and destruction toughness of the material using the solutions of dynamic plane problems of the stress-strain state in an elastoplastic formulation taking into account possible material unloading; 4) to verify and calibrate the solution of problems in an elastoplastic formulation for the first steps by time when the deformation process is elastic, it is convenient to use the solution of the corresponding elastic problem. uk_UA
dc.language.iso en uk_UA
dc.publisher Lira-K uk_UA
dc.relation.ispartofseries Transfer of innovative technologies;Vol. 1(2)
dc.subject impact uk_UA
dc.subject elastic uk_UA
dc.subject elastic-plastic uk_UA
dc.subject layer uk_UA
dc.subject plane problem uk_UA
dc.subject hard cylinder uk_UA
dc.title Impact a circular cylinder with a flat on an elastic layer uk_UA
dc.type Article uk_UA
dc.subject.udc 539.3 uk_UA


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account