Будівництво та цивільна інженерія
Постійний URI для цього зібранняhttps://repositary.knuba.edu.ua/handle/987654321/1219
Переглянути
3 результатів
Результати пошуку
Документ Corrosion Resistance of Polyester Powder Coatings Using Fillers of Various Chemical Nature(2020) Gots, Vladimir; Lastivka, Oles; Berdnyk, Oksana; Tomin, Oleksandr; Shilyuk, PetroIn the article the effect of fillers of various chemical nature on the corrosion resistance of polyester powder coatings i terms of flaking widths and corrosion expansion widths in accordance with DSTU ISO 4628-8: 2012 was reviewed. According to the results of studies, the effectiveness of the use of fillers to increase the corrosion resistance of the powder coating varies depending on the average particle size and crystalline form of the filler was found. As a rule, in order to receive a powder coating based decorative coating you should apply only one layer of paint, while liquid coatings require applying several layers; this increases the time of coating production. The powder coating can be easily utilized and recycled, thus the economic feasibility of production increasesДокумент The influence of technological factors on the properties of basalt fiber when used in the manufacture of flexible heat and sound insulating products(Proceedings of the 3rd Annual Conference “Technology transfer: fundamental principle and innovative technical solutions”. Tallin, Estonia, 2019) Berdnyk, OksanaAnalysis of energy efficiency and operational safety of technological equipment of industrial enterprises, engineering networks, buildings and structures, building structures in many sectors of the economy, including the housing and industrial sectors, causes interest in the use of high-tech, environmentally friendly heat and sound insulation materials with enhanced performance properties. One of the relevant representatives of these materials is basalt fibers and their use as raw materials in the production of flexible heat and sound insulating products. It is known that the chemical composition of the initial melt equally affects the physicochemical and mechanical properties of basalt fibers. The main influence factors, including the chemical composition, are the thermal past of the melt, the method for producing basalt fiber and the conditions for the formation of its structure. These factors determine the structural characteristics of the fiber and, as a consequence, its physicochemical characteristics. The degree of fiber strength is directly determined by its chemical composition and production method. The greatest strength of the fiber is obtained by ensuring the perfect fiber structure in the absence of ruptures of siliceous chainsДокумент INVESTIGATION OF PROPERTIES OF MODIFIED BASALT FIBERS(2018) Gots, Volodymyr; Palchyk, Petr; Berdnyk, OksanaThermophysical, physical-mechanical and acoustic characteristics of a rough continuous basalt fiber under the influence of operating factors and a corrosive environment are studied. It is shown that the production of protective materials with high thermophysical and acoustic properties is possible when creating a porous system with a known texture characteristic of pores of different classes, purposes and connections. An influence of the porous system of rough continuous basalt fiber on the operational properties of flexible heat and sound insulation products and materials is studied. The requirements of normative documents on thermal protection of buildings and structures have caused a constant tendency from the creation of new materials that ensure reliable operation of structures and equipment in the conditions of intensive influence of destructive factors of external influence. This led to an increase in requirements for walling wall materials that are used to fill openings in frame construction, or as an independent structural and thermal insulation material when building buildings with load-bearing walls. They are presented with a set of requirements that combines: physical and mechanical, chemical, hygienic, thermophysical, decorative and finishing, and other properties of the material. In this connection, there is a need to create materials that, having a small average density and high strength, are able to withstand the temperature loads, and the influence of an aggressive environment. It is determined that the performance characteristics of flexible heat and sound insulation materials are directly proportional to the degree of porosity of the composite materials and their structural characteristics. It is shown that the increase in the operating temperature of these materials, sound and thermal resistance is determined by the chemical and mineralogical composition of the initial materials and their structural characteristics. The influence of the mechanism of selective leaching of coarse continuous basalt fibers on their texture characteristics and the operating temperature zone is studied. The resulting material is produced from environmentally friendly raw materials using a one-stage technology without harmful effects on the environment and, unlike thermal insulation materials based on polymers or asbestos, has no harmful effect on the human body, meets the requirements of the European Union for the protection of the environment and sanitary and hygienic standards.