Київський національний університет будівництва і архітектури

Інституційний репозитарій

 

Нові надходження

Документ
The parametric oscillations of rotating rods under action of the axial beat load
(КНУБА, 2020) Nedin, V. O.
The paper presents the results of investigation of the axial beat loads’ influence on the transverse rotating rods’ oscillations and their stability. The perforator's long drills are considered as objects of investigation. The analysis of different author’s papers that are studded the dynamics of oscillations of shafts and rotating rods is carried out. The relevance of the research topic is substantiated. The model of the considered dynamic system is described and equations of oscillations in space are given. The technique for investigation is presented. This technique is based on search for new bend forms of rotating rod by solving the equations of oscillations with using the Hubbolt time integration method and the polynomial functions (splines) that are described the current bend form. In it, the spline functions are found by current bend form approximation where each of the found functions is responsible to certain point of rod elastic line and describes the position of nearby points. Described technique was realized in a computer program with graphic user interface that is developed by author. Program allows to monitor for dynamics of the oscillatory motion of the modeled system in real-time by calculating and drawing the current band forms of the rotating rod during the oscillation. Diagrams with regions of stable and instable motion of the rods, that were found by different parameters and boundary conditions are shown. The analysis of the results is obtained and the conclusion about possibility of operating the equipment in certain frequency ranges is done. The space oscillating process of rotating rods is considered with account of the gyroscopic loads and geometric nonlinearity.
Документ
Thermoelasticity of elastomeric constructions with initial stresses
(КНУБА, 2020) Bazhenov, V. A.; Kozub, Yu. G.; Solodei, I. I.
The article presents an algorithm for solving linked problems of thermoelasticity of elastomeric structural elements on the basis of a moment scheme of finite elements. To model the processes of thermoelastic deformation of structures with initial stresses the incremental theory of a deformed solid is used. At each step of deformation, the stiffness matrix is adjusted using an incremental geometric stiffness matrix. The use of triple approximation of displacements, deformations and volume change function allows to consider the weak compressibility of elastomers. The components of the stress tensor are calculated according to the Duhamel-Neumann law. To solve the problem of thermal conductivity, a thermal conductivity matrix considering the boundary conditions on the surface of a finite element is constructed. A sequential approximation algorithm is used to solve the thermoelasticity problem. At each stage of the solution, the characteristics of the thermal stress state are calculated. Based on the obtained components of stress and strain tensors, the intensity of internal heat sources is calculated as the dissipative energy averaged over the load cycle. To calculate the dissipative characteristics of the viscoelastic elastomer the parameters of the Rabotnov’s relaxation nucleus are used. Solving the problem of thermal conductivity considering the function of internal heat sources allows you to specify the heating temperature of the body. At each cycle of the algorithm, the values of the physical and mechanical characteristics of the thermosensitive material are refined. This approach to solving thermoelastic problems is implemented in the computing complex "MIRELA+". Based on the considered approach, the solutions of a number of problems are obtained. The results obtained satisfactorily coincide with the solutions of other authors. Considering the effect of preload and the dependence of physical and mechanical properties of the material on temperature leads to significant adjustments to the calculated values.
Документ
Іноземна мова (англійська). Тypes of electronic computers : методичні рекомендації
(КНУБА, 2023) Лук’яненко, Т. О.; Щербань, Ю. В.
Містять зміст, порядок оформлення і вказівки до виконання практичних завдань студентами освітнього рівня «бакалавр». Викладено тексти із вправами для поглибленого вивчення та розширення словникового запасу студентів. Призначені для студентів спеціальності 126 «Інформаційні системи і технології» факультету автоматизації та інформаційних технологій.
Документ
Іноземна мова (англійська) : методичні рекомендації
(КНУБА, 2023) Лук’яненко, Т. О.; Щербань, Ю. В.
Містять зміст, порядок оформлення та вказівки до виконання практичних завдань студентами освітнього рівня «бакалавр». Викладено тексти з ділового етикету з вправами для поглибленого вивчення й розширення словникового запасу студентів. Призначено для студентів 1-го курсу спеціальності 191 «Архітектура та містобудування.
Документ
Арматура для залізобетонних конструкцій : методичні вказівки
(КНУБА, 2023) Петрикова, Євгенія Миколаївна; Майстренко, А. А.; Амеліна, Н. О.; Резник, О. Ю.
Розглянуто зміст лекцій, лабораторних і практичних робіт, індивідуального завдання, наведено запитання для самоконтролю до кожної теми лекцій, тестові запитання для перевірки самостійної роботи студентів, перелік запитань для підготовки до семестрового контролю, основні терміни та визначення, а також список рекомендованої навчально-методичної літератури. Призначено для студентів за освітнім рівнем «бакалавр» спеціальності 192 «Будівництво і цивільна інженерія» спеціалізації 192.04 «Технологія будівельних конструкцій, виробів і матеріалів» для поглибленого засвоєння теоретичного курсу та підготовки до контролю знань із дисципліни «Арматура для залізобетонних конструкцій».
Документ
Ділова іноземна мова : методичні вказівки
(КНУБА, 2020) Вітрук, О. Є.; Сало, В. В.
Містять матеріали для вивчення англійської мови з курсу «Ділова іноземна мова», сім уроків з текстами та вправами. Призначено для студентів спеціальності 122 «Комп’ютерні науки та технології».
Документ
Basic relationships for physically and geometrically nonlinear problems of deformation of primatic bodies
(КНУБА, 2020) Maksimyuk, Yu. V.; Pyskunov, S. O.; Shkril, A. A.; Maksimyuk, O. V.
The initial relations of thermo elastic-plastic deformation of prismatic bodies are given in the paper. The basic concepts, indifference of deformation tensors, with the condition of energy conjunction in description of the shaping process are laid out on the basis of classical works.
Документ
Application of stiffness rings for improvement of operating reliability of the tank with shape imperfections
(КНУБА, 2020) Lukianchenko, O. O.
An efficiency of using of two stiffness rings for improvement of operating reliability of the tank with real shape imperfection at the action of combination load was evaluated. The computer model of the tank was constructed in the form of the thin cylindrical shell by of the program complex of finite element analysis. The tank stability problem under separate and joint action of surface pressure and axial compression was solved by the Lancosh method in linear formulation and as a nonlinear static problem by the Newton-Raphson method. The region of the tank failure-free work, which has the graphical presentation, confirmed the improvement of the tank wall stability due to the use of stiffness rings, especially in the area of surface pressure action.
Документ
Архітектурне формування дитячих дошкільних закладів на складному рельєфі
(КНУБА, 2020) Слєпцов, Олег Семенович; Кисельов, В. В.
У статті розглянуто основні тенденції архітектурно– планувального формування дитячих дошкільних закладів, розташованих на ділянках зі складним рельєфом. Охарактеризовано залежність особливостей різних форм рельєфу на загальне формування структури закладів дошкільної освіти. Проаналізовані містобудівні чинники, що впливають на використання ділянок зі складним рельєфом в умовах міста. У рамках статті сформовано основні чинник впливу складного рельєфу на архітектурне формування дошкільного закладу. Наведено аналіз сучасного досвіду проектування, будівництва та експлуатації закладів дошкільної освіти збудованих в умовах складного рельєфу. Проаналізовано загальні архітектурно – планувальні рішення в п’ятьох закладах дошкільної освіти, виявлено вплив характерних рис рельєфу місцевості на їх формування. Описані особливості формування комфортного та безпечного середовища для проведення виховного процесу в закладах дошкільної освіти, збудованих на ділянках зі складним рельєфом місцевості. Розглянуто концепцію «текучого» обсягу дитячого садку у якості способу розміщення дитячих дошкільних закладів на ділянках зі складним рельєфом та в складних містобудівних умовах.
Документ
Методичні вказівки до самостійної роботи з освітньої компоненти "Кам'яні та армокам'яні конструкції"
(КНУБА, 2024) Кріпак, Володимир Денисович; Колякова, Віра Маркусівна
Методичні вказівки містять рекомендації щодо самостійної роботи з освітньої компоненти "Кам'яні та армокам'яні конструкції". Призначено для здобувачів. що навчаються за спеціальністю 192 "Будівництво та цивільна інженерія" за освітньою-професійною програмою "Промислове і цивільне будівництво".